CMC – 1:18 Mercedes-Benz 300 SLR Uhlenhaut Coupe (1955)

This 1:18 scale diecast model of the 1955 Mercedes-Benz SLR Coupe in silver is made by CMC. It measures approximately 23.9 cm in length.

VEHICLE HISTORY

When Rudolf Uhlenhaut, the architect of the 300 SLR racer, was at the 1955 Mille Miglia to watch Mercedes’ success, he was also mulling over the idea of fitting the 300 SLR racer with a closed top for endurance events in the future.

His musings came to fruition in the shape of a competition coupé with the performance that no other road-going sports car could match. The two-seater recorded a speed of 290 km/h during a test on a closed section of motorway outside Munich. Impressed by its extraordinary performance over a cross-country trek of 3500 km (over 2000 miles), the test reporter from the Swiss magazine Automobil Revue had this to say:

“We are driving a car which barely takes a second to overtake the rest of the traffic and for which 200 km/h on a quiet motorway is little more than talking pace. With its unflappable handling through corners, it treats the laws of centrifugal force with apparent disdain …”

The 300 SLR racer was based on the famous W196 Formula One champion of the 1954-55 season. The abbreviation SLR stands for Sport Light-Racing (Sport Leicht-Rennen). Considered one of the most beautiful racecars of all time, the new SLR was equipped with a slightly different straight-eight engine, which was expanded to displace 3 litres. Two of the nine 300 SLR rolling chassis, namely 0007/55 and 0008/55, were converted into 300 SLR Coupés with a closed-top body and gullwing doors. They were intended for the forthcoming Carrera Panamericana.

The body of the SLR coupé was panelled in sheet Elektron, a magnesium alloy that is even lighter than aluminum. The semicircular windscreen generated very little wind resistance. As in the SLR racer, the coupé driver had to control the pedals with his legs apart behind the steering wheel. Under the bonnet was a longitudinally-mounted eight-cylinder engine, which was placed just behind the front axle, developing peak torque of 234 lb-ft at 5950 rpm and a maximum output of 310 horsepower at 7400 rpm.

Owing to safety concerns following the tragic accident at Le Mans back in June, Mercedes-Benz decided to pull out of motorsport at the end of 1955. As a result, the SLR coupé project was shelved and never went into production. Subsequently, Rudolph Uhlenhaut appropriated one of the coupés, chassis for his personal use. Weighing only 1,117 kg and capable of 290 km/h, the Uhlenhaut coupé was by far the fastest road car of its time in the world.

Although the 300 SLR coupés stopped short of racing seriously, chassis 0007/55 was no stranger to motorsport racing. After the 1955 Swedish Grand Prix, it showed up again at the RAC Tourist Trophy that took place at Dundrod, Northern Ireland on September 17, 1955.

ORIGINAL VEHICLE TECHNICAL DATA

• 8-cylinder in-line engine (installed in a 33° inclination to the right side)
• Direct fuel injection (positively controlled valves)
• Desmodromic valve control
• Underbody: wishbone in the front, single hinged swing axle in the rear.

Understanding Scale

The scale of a model is its size as a proportion to the real-life item. For instance, a 1:18 scale model means that every 1 unit of measurement on the model equals 18 units on the real item. If you divide the real item's size by 18, you'd get the size of the 1:18 model. Please note that models can vary slightly in size, as not all real-life items, like cars or planes, have the same dimensions.

Model Cars:

• 1:12 scale: ~38 cm or 15 inches
• 1:18 scale: ~25 cm or 10 inches
• 1:24 scale: ~18 cm or 7 inches
• 1:43 scale: ~10 cm or 4 inches
• 1:64 scale: ~7 cm or 2.75 inches
• 1:76 scale: ~6 cm or 2.3 inches

Model Trucks:

• 1:12 scale: ~75 cm or 29.5 inches
• 1:18 scale: ~50 cm or 19.7 inches
• 1:24 scale: ~38 cm or 15 inches
• 1:43 scale: ~21 cm or 8.3 inches
• 1:64 scale: ~14 cm or 5.5 inches
• 1:76 scale: ~12 cm or 4.7 inches

Model Bikes:

• 1:6 scale: ~30 cm or 12 inches
• 1:10 scale: ~18 cm or 7 inches
• 1:12 scale: ~15 cm or 6 inches