CMC 1:18Mercedes 300 SLR ウーレンハウト・クーペ (1955年)

在庫切れ
£599.99 inc. Tax

入荷次第お知らせください!

ウィッシュリストに追加
ウィッシュリストに追加
AlipayAmerican_expressApple_payGoogle_payMastercardPaypalVisaWechat_pay

何か他のものをお探しですか?

当社ウェブサイトでは数千点のモデルをご用意しております。下記の検索バーからお探しください。ブランド、カテゴリー、ドライバー、タイプ、メーカー、スケールなど、様々な条件で検索可能です。

CMC 1:18Mercedes 300 SLR ウーレンハウト・クーペ (1955年)

This 1:18 scale diecast model of the 1955 Mercedes-Benz SLR Coupe in silver is made by CMC. It measures approximately 23.9 cm in length.

VEHICLE HISTORY

When Rudolf Uhlenhaut, the architect of the 300 SLR racer, was at the 1955 Mille Miglia to watch Mercedes’ success, he was also mulling over the idea of fitting the 300 SLR racer with a closed top for endurance events in the future.

His musings came to fruition in the shape of a competition coupé with the performance that no other road-going sports car could match. The two-seater recorded a speed of 290 km/h during a test on a closed section of motorway outside Munich. Impressed by its extraordinary performance over a cross-country trek of 3500 km (over 2000 miles), the test reporter from the Swiss magazine Automobil Revue had this to say:

“We are driving a car which barely takes a second to overtake the rest of the traffic and for which 200 km/h on a quiet motorway is little more than talking pace. With its unflappable handling through corners, it treats the laws of centrifugal force with apparent disdain …”

The 300 SLR racer was based on the famous W196 Formula One champion of the 1954-55 season. The abbreviation SLR stands for Sport Light-Racing (Sport Leicht-Rennen). Considered one of the most beautiful racecars of all time, the new SLR was equipped with a slightly different straight-eight engine, which was expanded to displace 3 litres. Two of the nine 300 SLR rolling chassis, namely 0007/55 and 0008/55, were converted into 300 SLR Coupés with a closed-top body and gullwing doors. They were intended for the forthcoming Carrera Panamericana.

The body of the SLR coupé was panelled in sheet Elektron, a magnesium alloy that is even lighter than aluminum. The semicircular windscreen generated very little wind resistance. As in the SLR racer, the coupé driver had to control the pedals with his legs apart behind the steering wheel. Under the bonnet was a longitudinally-mounted eight-cylinder engine, which was placed just behind the front axle, developing peak torque of 234 lb-ft at 5950 rpm and a maximum output of 310 horsepower at 7400 rpm.

Owing to safety concerns following the tragic accident at Le Mans back in June, Mercedes-Benz decided to pull out of motorsport at the end of 1955. As a result, the SLR coupé project was shelved and never went into production. Subsequently, Rudolph Uhlenhaut appropriated one of the coupés, chassis for his personal use. Weighing only 1,117 kg and capable of 290 km/h, the Uhlenhaut coupé was by far the fastest road car of its time in the world.

Although the 300 SLR coupés stopped short of racing seriously, chassis 0007/55 was no stranger to motorsport racing. After the 1955 Swedish Grand Prix, it showed up again at the RAC Tourist Trophy that took place at Dundrod, Northern Ireland on September 17, 1955.

ORIGINAL VEHICLE TECHNICAL DATA

  • 8-cylinder in-line engine (installed in a 33° inclination to the right side)
  • Direct fuel injection (positively controlled valves)
  • Desmodromic valve control
  • Underbody: wishbone in the front, single hinged swing axle in the rear.
最大出力: 310 hp at 7,500 rpm
変位: 2,982 ccm
Top speed: approx. 300 km/h
Wheel base: 2,370 mm
全長: 4,315 mm
寸法 23.9cm

状態

真新しい

ブランド

ブランド

材料

募集

はい – ドア、ボンネット、トランク

範囲

製品コード

076

スケール

カテゴリ

ダイキャストモデル

レビュー

まだレビューはありません

レビューを追加する
CMC - 1:18 Mercedes-Benz 300 SLR Uhlenhaut Coupe (1955) CMC 1:18Mercedes 300 SLR ウーレンハウト・クーペ (1955年)
評価*
5
* 評価が必要です
あなたのレビュー
* 確認が必要です
名前
* 名前は必須です
レビューに写真や動画を追加する


    スケールの理解

    モデルのスケールとは、実物に対するその大きさの比率を指します。例えば、1:18スケールのモデルとは、モデル上の1単位が実物の18単位に相当することを意味します。実物の大きさを18で割ると、1:18モデルの大きさが得られます。 なお、自動車や飛行機など実物の寸法が必ずしも同一ではないため、モデルによってサイズが若干異なる場合がある点にご留意ください。

    モデルカー:

    • 1:12スケール: 約38cm または15インチ
    • 1:18スケール: 約25cm または10インチ
    • 1:24スケール: 約18cm または7インチ
    • 1:43スケール: 約10cm または4インチ
    • 1:64スケール: 約7cm または2.75インチ
    • 1:76スケール: 約6cm または2.3インチ

    モデルトラック:

    • 1:12スケール: 約75cm または29.5インチ
    • 1:18スケール: 約50cm または19.7インチ
    • 1:24スケール: 約38cm または15インチ
    • 1:43スケール: 約21cm または8.3インチ
    • 1:64スケール: 約14cm または5.5インチ
    • 1:76スケール: 約12cm または4.7インチ

    モデルバイク:

    • 1:6スケール: 約30cm または12インチ
    • 1:10スケール: 約18cm または7インチ
    • 1:12スケール: 約15cm または6インチ

    製品免責事項

    このモデルカーは手作業で製作されています。手作りのミニチュアの性質上、わずかな不備が生じる可能性があります。これらは製造工程における通常の現象であり、メーカーは設定された許容範囲内で作業を行うため、一部の小さな欠陥は許容範囲内と見なされます。 重大な欠陥のあるモデルをお受け取りになった場合、返品または返金による対応をさせていただきます。ただし、軽微な不備は欠陥ではなく、これらのモデル制作に込められた職人技の証であることをご理解ください。手作りのコレクターズアイテムに対するご理解とご愛顧に感謝申し上げます。

    配送:

    • 月曜日から金曜日の14:00までにご注文いただいた商品は、当日中に発送いたします。14:00以降のご注文は、翌営業日に発送いたします。
    • 注文が集中している間は遅延が発生する可能性があります。大幅な遅延が生じた場合はメールにてご連絡いたします。
    • 世界中へ発送いたします。地域ごとに異なる料金設定がございます:
    • 発送後、配達確認と追跡番号を提供します。

    返品・返金について:

    • 30日間の返品ポリシー。商品は未使用で、元の包装に入っている必要があります。
    • 危険物または可燃性物品の返品はお受けできません。
    • 返品は support@model-universe.com 宛にメールでご連絡ください。メーカーへの直接返送はご遠慮ください。
    • 返品先住所:Model Universe, 3 Hagley Court North, The Waterfront, Dudley, West Midlands, DY5 1XF, UK.
    • 返金処理にかかる時間は商品によって異なります。遅延が生じた場合はお問い合わせください。セール品は返金条件が異なる場合があります。

    配送エリア、紛失・破損した荷物、関税、および返品ポリシーの詳細については、こちらをクリックしてください

    £200以上のご注文で英国国内送料無料

    30日間返品無料

    全世界配送