1:18 Ferrari 288 GTO (1984) – Diecast Model – KK Scale

Out of Stock
£88.99

Notify me when available!

AlipayAmerican_expressApple_payGoogle_payMastercardPaypalVisaWechat_pay

1:18 Ferrari 288 GTO (1984) – Diecast Model – KK Scale

Disclaimer: This model car is hand-built. Due to the nature of hand-crafted miniatures, minor imperfections are to be expected. These are a normal part of the production process, as manufacturers work within set tolerances, meaning some small defects are considered acceptable. If you receive a model with a significant defect, we are happy to assist and will address the issue accordingly by offering a return or refund. However, please understand that minor imperfections do not qualify as faults but rather reflect the craftsmanship involved in creating these models. Thank you for your understanding and appreciation of these hand-built collectibles.

Announced by Enzo Ferrari in September 1983, and unveiled at the Geneva Motor Show in March 1984, the GTO sparked off a wave of enthusiasm. The legendary moniker (named after the 250 GTO of the mid-1960s), the stunning styling by Pininfarina, the engine with its seemingly inexhaustible power and the widespread use of innovative composite materials made the GTO the closest thing to a racing car. Largely because that’s exactly what it was conceived to be.

Common lore says the Ferrari 288 GTO was designed to go racing in the subsequently aborted Group B category of rallying, with a limited run of 200 cars to satisfy the two hundred unit build number for homologation purposes. But according to Ferrari engineer and father of the 288 GTO, Nicola Materazzi, the project predated Group B regulations. The GTO, he said, was born out of Enzo Ferrari’s concern that his road cars had lost their edge so much so that cars which were “fractions of Ferraris” could beat them. Whatever the reason for its conception, the GTO never raced. Group B was cancelled for safety reasons but Ferrari persevered. Such was the sensation of its appearance at Geneva, the car sold out immediately before production had even commenced. One potential buyer wanted a GTO so badly that he paid 20,000 Swiss francs for a document attesting that he would buy number 201 if it was built. He was in luck. Ultimately, Ferrari turned out a total of 272 GTOs between 1984-86. Still, dealerships would get no more than one example—and would have to handpick a customer to be approved by Ferrari. Most went for well over their asking price. Today, that’d be a bargain, as the 288 GTO, just like its 1960s predecessor, is now prized on the collector market.

The GTO really captured the imagination, though visually it was nothing startlingly different to the series production models at the time. The Pininfarina-designed body was formed by old-school methods; designers took their preliminary sketches straight to the workshop, dispensing with then-nascent computer aided design. Flared fenders, spoilers, and multiple air intakes front and rear gave the car a much more aggressive stance: a 308 on steroids. Though based on the 308 series silhouette, they shared very few components. The GTO was highly influenced by the Formula 1 team, using a high-tensile steel spaceframe with Kevlar, fibreglass and aluminium elsewhere. Its 400hp, 2,855cc V8 beating heart defined its unofficial name; its fans christened it the ‘288’ to distinguish it from the legendary 250 GTO. The power unit was mounted longitudinally to improve its 1160kg weight distribution, which allowed the ancillaries, gearbox and twin IHI turbochargers to be more efficiently packaged, though Pininfarina design boss Leonardo Fioravanti still had to stretch the wheelbase by 11cm and widen the track. Despite this, the GTO was 5mm shorter than the 308, due to a reduced rear overhang. It is also the first Ferrari to have ever been fitted twin turbochargers. Boasting a top speed of 189mph (305km/h), the 288 accelerated to 62mph (100km/h) in a speedy 4.9 seconds. Regardless of its racing-based origins, the GTO was suitably equipped for road use, with leather trimmed seats as standard and options such as electric windows and air conditioning available.

Colour

Barcode

4260699762238

Product Code

KKDC180414

Condition

Brand New

Brand

,

Openings

No

Marque

Range

, , ,

Categories

Diecast Models

Material

Period

1980's

Scale

One response to “1:18 Ferrari 288 GTO (1984) – Diecast Model – KK Scale”

Leave a Reply

Your email address will not be published. Required fields are marked *


    Understanding Scale

    The scale of a model is its size as a proportion to the real-life item. For instance, a 1:18 scale model means that every 1 unit of measurement on the model equals 18 units on the real item. If you divide the real item's size by 18, you'd get the size of the 1:18 model. Please note that models can vary slightly in size, as not all real-life items, like cars or planes, have the same dimensions.

    Model Cars:

    • 1:12 scale: ~38 cm or 15 inches
    • 1:18 scale: ~25 cm or 10 inches
    • 1:24 scale: ~18 cm or 7 inches
    • 1:43 scale: ~10 cm or 4 inches
    • 1:64 scale: ~7 cm or 2.75 inches
    • 1:76 scale: ~6 cm or 2.3 inches

    Model Trucks:

    • 1:12 scale: ~75 cm or 29.5 inches
    • 1:18 scale: ~50 cm or 19.7 inches
    • 1:24 scale: ~38 cm or 15 inches
    • 1:43 scale: ~21 cm or 8.3 inches
    • 1:64 scale: ~14 cm or 5.5 inches
    • 1:76 scale: ~12 cm or 4.7 inches

    Model Bikes:

    • 1:6 scale: ~30 cm or 12 inches
    • 1:10 scale: ~18 cm or 7 inches
    • 1:12 scale: ~15 cm or 6 inches

    Product Disclaimer

    This model car is hand-built. Due to the nature of hand-crafted miniatures, minor imperfections are to be expected. These are a normal part of the production process, as manufacturers work within set tolerances, meaning some small defects are considered acceptable. If you receive a model with a significant defect, we are happy to assist and will address the issue accordingly by offering a return or refund. However, please understand that minor imperfections do not qualify as faults but rather reflect the craftsmanship involved in creating these models. Thank you for your understanding and appreciation of these hand-built collectibles.

    Delivery:

    • Orders placed before 14:00 (Monday-Friday) are dispatched the same day. After 14:00, they're dispatched the next working day.
    • Delays may occur during high order volume. Any significant delays will be communicated via email.
    • We ship globally, with specific rates for different zones:
    • Delivery confirmation and tracking number provided post-dispatch.

    Returns & Refunds:

    • 30-day return policy. Items must be unused, in original packaging.
    • No returns on hazardous or flammable items.
    • Start returns by emailing support@model-universe.com. Do not return to the manufacturer.
    • Returns address: Model Universe, 3 Hagley Court North, The Waterfront, Dudley, West Midlands, DY5 1XF, UK.
    • Refund processing times vary; contact us if delays occur. Sale items may have different refund terms.

    For detailed info on shipping zones, lost/damaged shipments, duties, and our full return policy, click here.

    Free UK delivery on orders over £200

    30 days hassle free returns

    Worldwide Delivery